Kawasaki Ninja 300 Top Speed & Acceleration - MotoStatz (2024)

The Ninja 300 Accelerates like a Sports Car

Kawasaki’s Ninja 300 is an entry-level sports motorcycle aimed at new motorcyclists and is the little sister of the Ninja 400and replaces the Ninja 250 in many markets though in some countries it is still sold alongside at the time of writing.

The Ninja 300 is a machine that offers sporty looks, and decent performance and handling that is accessible to new riders.

It’s a user-friendly package all at an affordable price.

The Nina 300 is Powered by a compact 296 cc parallel two-cylinder engine that makes a claimed 35 horsepower and 20 lb/ft of torque.

These numbers do not sound earth-shattering but are very respectable for a sub 300 cc motorcycle.

Many new riders are interested in the performance capabilities of the Ninja 300 so we thought it fitting to include it as one of the first machines that we will test the acceleration and top speed of.

Kawasaki Ninja 300 Dyno Curve and engine performance

Kawasaki Ninja 300 Top Speed & Acceleration - MotoStatz (1)

For such a small and compact engine, the Ninja 300 and its 296 cc parallel 2 make a respectable amount of power.

The thirty-odd horsepower the Ninja 300 produces is comparable to the thirty-horsepower two-stroke 125s that some of you reading may recall ‘Hooning’ around on in your youth.

They were ballistic and very fun machines and a little more hard-edge than the four-stroke machines such as the Ninja 300 that replaced them.

The Ninja 300 produces a very respectable 35 horsepower at the wheels which are delivered at a little over 11,000 rpm.

Torque is a lowly 16 ft/lb that chimes in a little after 8000 rpm.

In motorcycle terms, this will not set the world on fire but is more than powerful enough to get the job done and to put a smile on your face.

If you are a new rider and have never ridden a motorcycle the Ninja 300 will feel very quick.

The engine is smooth and has a reasonable amount of low to mid-end power and torque if you’re in the lower gears, and certainly enough to zip you passed slow-moving traffic.

For best effect, you’d better ‘work’ the engine and ensure that you are in the correct gear with your revs floating around the 8000-rpm mark and the Ninja 300 offers decent drive.

That rpm figure may sound bonkers to a car driver but it’s the normal upper mid-range of a sporty motorcycle engine and especially a small capacity one.

From 8,000 rpm right up until the 13,000 rpm red line there is a fair bit of go ensuring that the Nina 300 gets a move on when required.

For a long while, the Ninja 300 engine was the class leader. And it was among the fastest if not the fastest four-stroke motorcycle under 300 cc

It only really had the CBR250R and Hyosung GT250, and more recently the GSX250R to compete against.

Now the engine sits behind the Yamaha R3 CBR500R and KTM RC390 but has the legs on the CBR300R.

Kawasaki Ninja 300 Top Speed & Acceleration - MotoStatz (2)

Ninja 300 in-gear acceleration

Compared to the KTM RC 390, the Ninja 300 does lack the flexibility of the larger KTM engine but scores more points for smoothness and refinement compared to the more brash single cylinder of the RC.

And if you work the engine and gearbox hard you can keep these bigger bikes in sight though you must really work the gearbox hard and keep that rpm high.

If you don’t use all the power it has the Kawasaki Ninja 300 will struggle to keep them rivals in sight.

The Yamaha YZF-R3 like the KTM RC 390 benefit from a larger engine over the Ninja 300 and thus both produce more power and torque.

The Yamaha YZF-R3 has a 321 lump cc vs the 296 cc engine for the Ninja 300. The RC 390 is much bigger at 373 cc.

That capacity advantage may not sound much, but for motorcycles with small engines, even a slight capacity advantage makes a huge difference.

The Yamaha YZF-R3 motor shares a similar character to the Ninja 300 as they share the same configuration and rev similarly high

As the Yamaha YZF-R3 has a slightly larger capacity ensures that it produces a little more power and torque through the entire rpm range and at peak.

Kawasaki has since responded with the Ninja 400, a motorcycle that we’ve also recently run against the clock.

Speeds in each gear at 5000 rpm

Speed at 5000 rpmNinja 300
1st Gear14.6 mph
2nd Gear22.2 mph
3rd Gear28.2 mph
4th Gear34.2 mph
5th Gear39.7 mph
6th Gear46.3 mph

Regardless of the advantages that the competitors have, the Ninja 300 engine does a great job in almost all realistic road-riding situations.

Even on the highway in top gear, you can overtake adequately but only if you are not on an incline or facing a very strong headwind.

Ideally, though you should probably drop to fifth gear which will bring the rpm up from around 7600 rpm to 8800 rpm which is very close to where the Ninja 300 produces peak torque.

You could even drop it to fourth gear taking the rpm up to around 10,200 rpm.

To get the overtake done though you would need to take the RPM into the red and shift up to fifth for good measure.

The highway is not really where the Kawasaki Ninja 300 works best. And this could also be said for the Ninja 300s rivals too!

Its engine works much better in town and blasting around on country roads. You of course still have to work the engine, use all of the rpm, and kick it up and down gears.

It is a very fun engine to use. There is no wonder why there are soman y racing series where the Ninja 300 is used.

Kawasaki Ninja 300 Top Speed & Acceleration - MotoStatz (3)

Kawasaki Ninja 300 Acceleration through the gears

Despite only having 296 cc the little Kawasaki Ninja 300 can accelerate quickly up to a point and will beat most hot hatches from 0-60 mph (0-96 km/h).

If you are very skillful it is possible to even show the odd sports car a thing or two with the Ninja 300s impressive 0-60 mph time of only 5.23 seconds.

The sprint from 0-100 km/h for the Ninja 300 arrives in a little over 5.70 seconds

It is important that you slip the clutch perfectly and shift as quickly as possible with clutchless changes for the best effect.

You must have rpm hovering around 9000 rpm on launching and slipping the clutch and controlling rpm so that the engine does not bog down resulting in your time suffering.

Most learner riders would likely be hitting 7-8 seconds, but a real pro can achieve low five-second times for the 0-60 mph benchmark.

From 60 mph to 100 mph, you still have hot hatch performance, but you’d better make yourself small and tuck those elbows in otherwise the elements will start to hold you back.

In optimum conditions, the Kawasaki Ninja 300 can claim 0-100 mph in 18 seconds and a quarter mile time of 14.10 seconds where the little Ninja hits a terminal speed of 93 mph.

Once you hit 100 mph you need another kilometer to hit the Ninja 300’s top speed of 110 mph.

It’s hard work getting the most out of a small-capacity motorcycle when it comes to acceleration and top speed. A slight headwind can mean 5-10 mph lower top speed easily.

It is kind of game over in terms of acceleration once the Ninja 300 is at the top end of fifth gear,

So don’t expect to be cruising at 95 mph with any real overtaking ability though at legal motorway/highway speeds there is enough poke to get you ahead of slow-moving traffic as mentioned.

Accelerating from 70-80 mph time of just 2.1 if using fourth gear. If using sixth gear then maybe add a few seconds but it’s not advisable.

KTM 390 Duke Acceleration and Top Speed

You cannot go wrong with the Ninja 300 as it is a great bike.

Yes, there are newer and faster alternatives, but the Ninja 300 really does strike a great balance between user friendliness and performance provided you like to work a little for that performance.

Kawasaki Ninja 300 Acceleration
SpeedTime
0-10 mph0.67
0-20 mph1.35
0-30 mph2.03
0-40 mph2.87
0-50 mph3.88
0-60 mph5.23
0-70 mph6.97
0-80 mph9.17
0-90 mph12.42
0-100 mph18.03
0-110 mph51.10
SS/QM14.1/93 mph
SS/KM27.25/109 mph
SS/Mile39.58/109 mph
Top Speed110 mph

Kawasaki Ninja 300 Specifications

Kawasaki Ninja 300
Engine
Engine type4-stroke, 2-cylinder, DOHC, liquid-cooled
296cc296 cc
Bore x stroke62.0 x 49.0 mm
Compression ratio10.6:1
Maximum power35 HP 10500 RPM
Maximum torque25 ft.lbs) @ 9000 RPM
Lubrication systemWet sump
Clutch typeSlipper and self-servo wet multiplate clutch with hydraulic control
Ignition systemTCBI with digital advance
Starter systemElectric
Transmission systemConstant Mesh, 6-speed
Final transmissionChain
Chassis
FrameSemi-double cradle, high-tensile steel
Front suspension system37mm hydraulic telescopic fork/4.7 in
Rear suspension systemUni-Trak® with 5-way adjustable preload/5.2 in
Front brakeSingle 290mm petal-type disc with 2-piston hydraulic caliper, ABS
Rear brakeSingle 220mm petal-type disc with 2-piston hydraulic caliper, ABS
Front tyre110/70×17
Rear tyre140/70×17
Dimensions
Wheelbase1,437 mm
Wet weight (including full oil and fuel tank173 KG
Fuel tank capacity17 litres

Tags: Ninja 300 Acceleration

Kawasaki Ninja 300 Top Speed & Acceleration - MotoStatz (2024)

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Van Hayes

Last Updated:

Views: 6622

Rating: 4.6 / 5 (66 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Van Hayes

Birthday: 1994-06-07

Address: 2004 Kling Rapid, New Destiny, MT 64658-2367

Phone: +512425013758

Job: National Farming Director

Hobby: Reading, Polo, Genealogy, amateur radio, Scouting, Stand-up comedy, Cryptography

Introduction: My name is Van Hayes, I am a thankful, friendly, smiling, calm, powerful, fine, enthusiastic person who loves writing and wants to share my knowledge and understanding with you.